CASE STUDY: 60E1 Rail System for a Shipyard in the Philippines

Crane Rail Alternative: 60E2 To 60E1 Rail & Turnkey rail export solution

In February 2026, GLORYCRANE fulfilled a crane rail supply order for a Taiwanese client, with the end user being a shipyard in the Philippines. The project involved selecting rail profiles, coordinating the supply of rails made from different steel grades, and providing a combined supply of rails and matching fasteners.

This project involves supplying a complete crane rail system to a shipyard in the Philippines. As the crane rail supplier for shipyards on this project, our company secured this order through a trading partner in Taiwan, China, and delivered the rails, joint plates, and rail fasteners—all matched to the same rail type—as a complete system —including a total of approximately 1,450 meters of 11.69-meter fixed-length rails, 124 sets of four-hole fishplates, and 992 sets of Type 3120 rail clamps with M20×75 bolts.

There were two key decisions made during this delivery: First, the steel mill originally specified by the customer had no production schedule for the rail profile, so our company proposed an alternative rail profile and provided a written technical explanation; second, due to tight deadlines for the first shipment, the choice of material had to be based on actual test data rather than on experience or convention. These will be explained in detail below.

Project Data

ItemDetails
Scope of Supply124 piece 60E1 rails × 11.69 m +124 sets of four-hole fishplates + 992 sets of Type 3120 rail clamps and bolts
Initial Batch31 pieces, SS material
Additional Batch93 pieces, R260 steel
Fishplates124 sets, four-hole type
Rail Clips992 sets of 3120 clips
BuyerTaiwan, Terminal Equipment Integrator
End-UserA Major Shipyard in the Philippines
LogisticsTianjin Port, China ➔ Manila North Port, Philippines
Shipment StatusSuccessfully exported

The Challenge

The project initially specified the use of 60E2 rails. However, at the time of enquiry, no rolling slot was available within the project schedule for this rail type, meaning the delivery schedule could not meet the shipyard’s established project milestones.

Key Pain Points and Customer Concerns

Profile production gap vs. tight schedule

The customer initially specified a particular rail profile, but the factory had no immediate production plans for it, and the lengthy production cycle would directly cause delays in the shipyard’s construction; selecting a crane rail profile and identifying viable alternatives became the primary challenge.

Urgent delivery vs. insufficient mainstream material stock

The first batch of orders required expedited shipping, but there was insufficient stock of the standard R260 rail-grade steel. The availability of stock rail directly hindered the project’s progress, and the customer urgently needed an alternative material with equivalent performance.

Compatibility requirements for batch supply

Any subsequent additional orders placed by the customer must be compatible with the performance of the initial batch of products, and the delivery schedule must align with the on-site construction progress.

Corrosion demand in marine environment

Rail systems operating in salt spray environments face a high risk of corrosion. Customers are highly concerned about the corrosion resistance of rails and fasteners and hope to reduce long-term operational and maintenance costs.

Sudden cross-border compliance risk

On the eve of the originally scheduled shipment, delays in the approval of the end-user import license posed multiple risks to the original shipping schedule, including port delays, container demurrage charges, and breach of contract.

Customized Engineering Solutions

Rail Profile Selection: From 60E2 to 60E1

The two profiles share the same nominal rail height (172 mm) and foot width (150 mm) and the same fishplate hole arrangement; the difference lies in the rail head contour. Interchangeability was checked against EN 13674-1 and confirmed during the shipyard’s technical review. Since both the fishplates and rail clamps are supplied to match the 60E1 rail type, the risk of interface incompatibility is significantly reduced; for this project, no modifications to the existing design are required.

Coordinating Two Rail Material Options

In response to the tight delivery schedule for the first batch of orders, we provided a tailored rail material comparison proposal, which included a detailed comparison of crane rail steel grades based on the two most common materials.

We have systematically explained the performance differences between R260 and SS rail steel in terms of chemical composition, tensile strength, surface hardness, and wear resistance. Both pearlitic rail grades widely used in heavy-duty applications. In terms of the wheel load and service classification defined for this project, both grades met the specified mechanical property requirements.

Mechanical properties

Rail Type Steel Grade Hardness
HB
Tensile Strength Elongation
%
60E1 Steel RailSS≥ 310≥ 142.5ksi≥ 10
60E1 Steel RailR260260-300≥880 Mpa≥ 10

Chemical composition

Steel Grade C
%
Mn
%
P
%
S
%
Si
%
Cr
%
V
%
Al
%
SS 0.74 – 0.860.75 – 1.25≤ 0.020≤ 0.020 0.10 – 0.60≤ 0.30≤ 0.010≤ 0.010
R260 0.62 – 0.800.70 – 1.20≤ 0.025≤ 0.025 0.15 – 0.58≤ 0.15≤ 0.030≤ 0.004

Ultimately, a mixed-grade rail supply model was adopted:

  • The initial batch of 31 rails consisted of SS-grade spot stock to ensure rapid shipment and meet urgent construction deadlines;
  • The subsequent batch of 93 rails was precisely matched to R260 rail-grade spot stock to accommodate the customer’s preference for standard materials.

We also provided on-site installation and welding guidelines for rails of different materials to ensure construction compatibility.

One complete rail and fastening package

Rails, four-hole fishplates, Type 3120 rail clamps, and M20×75 bolts are selected based on the same rail type and shipped in the same batch. For shipyards, shipping rails, fishplates, clamps and bolts as one matched package helps avoid the interface mismatch and staggered delivery dates that often result from split procurement

Support through the permit delay

Upon learning of the delay in the import license approval, we immediately activated our contingency plan:

  • We prioritized coordinating warehouse resources at the Port of Tianjin to arrange temporary storage of the goods, which helped the shipment avoid demurrage and container overstay fees.
  • We secured space on subsequent sailings in advance and assigned dedicated personnel to monitor the progress of the approval process;
  • Prepared a complete set of customs clearance documents in advance to support faster customs clearance once the goods arrive at the port.

Order Coordination and Successful Export Delivery

The first batch of 31 SS-grade 60E1 rails has entered the shipping preparation stage. However, prior to the originally scheduled shipment date, the end user’s import license had not yet been approved; therefore, the first batch of rails could not be shipped as planned.

Subsequently, the customer placed an additional order for 93 60E1 rails manufactured from R260 rail steel. GLORYCRANE coordinated the quantities of the initial and additional batches and arranged for the two shipments to be consolidated.

The final shipment consisted of 124 pieces of 60E1 rail, each 11.69 m long, as well as the four-hole fishplates, Type 3120 rail clamps, and M20 × 75 mm bolts specified in the order. The entire shipment was successfully exported from Tianjin, China, to North Port in Manila, Philippines.

This project highlights the importance of coordinating changes in order quantities, material options, and export requirements throughout the supply process. By consolidating the two batches into a single shipment, GLORYCRANE successfully completed the export arrangements for the entire order.

Project Value & Customer Benefits

Significantly improved delivery efficiency

By drawing on the spot stock available at the time of order instead of waiting for a new rolling slot, the first batch was shipped an estimated 4–6 weeks earlier than new production would have allowed, helping the yard keep to its original schedule

Reduced comprehensive procurement cost

Supplying the complete track package reduced the coordination and procurement efforts involved in managing multiple suppliers. For the first batch, SS-grade steel was selected to improve corrosion resistance in the salt-spray environment.

No design changes required

The alternative profile was approved in the shipyard’s technical review, and no design changes or on-site construction adjustments were required for this order, avoiding the cost of design rework and additional cross-regional coordination

Effectively controlled cross-border risks

This contingency plan helped avoid additional costs, such as such as port demurrage and contract penalties, and kept this shipment on schedule despite the licence delay

Why Choose GLORYCRANE for Crane Rail Supply?

GLORYCRANE provides crane rails and related fastening accessories for industrial lifting and material handling applications. Our supply process focuses on understanding the rail types required by our customers, evaluating alternative options when necessary, and coordinating rail and accessory specifications based on the scope of each order.

To prepare a quote, please provide the following information:

  • Rail type or drawings (e.g., 60E1, 60E2, A100, QU70)
  • Quantity and cut-to-length specifications
  • Steel grade requirements or operating conditions (wheel load, duty cycle)
  • Fastener type and quantity
  • – Port of destination and required delivery date

Have a crane rail enquiry? Contact GLORYCRANE with the details above and we will confirm availability, alternative options and lead time.

Scroll to Top