Square Bar Crane Rail

flat-bar-rail2

Welded Square Rails Suitable for Light Cranes

For light cranes, we can sometimes take the simplest, low-cost method to build its track.
That is to directly use square steel or flat steel, by welding together to build the track.

Steel Square Bar Rail is a special type of flat steel rail with a square-shaped cross-section.

Square steel rails are welded over steel supporting beams, minimum yield stress shall be 250 N/mm2.

It’s commonly used in light-duty cranes with small capacity, up to 15 ton. Due to its simple structure, we usually see its application in old track systems, light lifting equipment, or in small industrial settings.

Due to the large contact surface with the wheels, the crane operates smoothly at low speeds, but it may also cause more wear to the wheels.

GloryCrane can offer 40*40, 50*50, 60*60, 70*70, 80*80 square bar rail, and 40*30, 50*30, 60*40, 70*40, 100*60 flat bar rail, as well as other customized dimensions. We have our own processing factory that can provide 45 degree angle cutting services, galvanizing, and smooth surface services. The length is 5.8m.

Our flat steel rails with rounded corners of R3, 3mm, and are more suitable for the operation of crane rail wheels.

square bar for crane rail
Steel Square Bar for crane rail.
flat bar for crane rail
Flat Bar for crane rail.
flat-rail-welding
Flat steel rail for welded to the support beam.
Flat steel rail welded on the surface of Supporting beam
Square bar rail for welded over supporting beam to support the movement of crane wheels.

Key Characteristics of Square Bar Crane Rail

  • Simple Cross-Section: The square shape provides a flat surface for load-bearing.
  • Lighter Loads: Suitable for light-duty applications where the forces applied are minimal.
  • Easy Installation: Its basic design makes it easy to produce, cut, and install.
  • Cost-Effective: It is more cheaper than specialized rail profiles, such as QU Rails, DIN536 Rails.
  • Limited Applications: While affordable, it wears down quicker under high-friction or heavy-load conditions.

Common Applications of Square Bar Rails

  • Light Material Handling Systems: In factories or warehouses where loads are small.
  • Older or Specialty Rail Systems: Where heavier, more sophisticated rails aren’t necessary.
  • Custom Industrial Uses: For specific industries or machines with limited operational demands.

Specifications of Square Bar & Flat Bar Crane Rail

steel square bar rail

Steel Square Bar Rail

SizeHeight (mm)WidthWeight(kg/m)
30x30mm30307.065
40x40mm404012.56
50x50mm505019.625
60x60mm606028.26
70x70mm707038.465
80x80mm808050.24
90x90mm909063.585
100x100mm10010078.5
110x110mm11011094.985
You can choose S355, ST52, Q355B, Q345B, Q345Cr or other specified material. GloryCrane support customized length and 45-degree cutting services for easy welding and installation.
steel flat bar rail

Steel Flat Bar Rail

SizeHeight (mm)WidthWeight(kg/m)
40x30mm30409.42
50x30mm305011.775
60x40mm406018.84
65x40mm406520.41
70x40mm407021.98
75x40mm407523.55
80x60mm608037.68
90x40mm409028.26
100x60mm6010047.1
You can choose S355, ST52, Q355B, Q345B, Q345Cr or other specified material. GloryCrane support customized length and 45-degree cutting services for easy welding and installation.

The sizes and materials of the general square steel or flat steel rails we produce and provide are as follows. Other sizes and specifications can be customized according to your requirements.

  • 40*40*5800mm Q345B/St52-3 square bar rail
  • 60*60*5800mm Q345B/St52-3 square bar rail
  • 80*80*5800mm Q345B/St52-3 square bar rail
  • 60*40*5800mm Q345B/St52-3 flat bar rail
  • 70*40*5800mm Q345B/St52-3 flat bar rail
  • 80*60*5800mm Q345B/St52-3 flat bar rail

Steel Q345B (GB) is a Chinese steel grade, equivalent to the German DIN standard St52-3 and the European EN standard S355JR (1.0045).

Our Advantages

Fixed length in 5.8m, reduce welding points.

Our square bar steel or flat bar steel is strictly straight and has a smooth surface.

Compared with P rail or A-type rail, square steel rail saves more weight and is cheaper.

The contact area between the square steel rail and the crane wheel tread is larger to ensure stability.

Our flat steel rails with rounded corners of R3, 3mm, and are more suitable for the operation of crane rail wheels.

We can provide 45-degree angle cutting services.The two ends of square steel or flat steel are cut by sawing machines to facilitate assembly and welding.

Our Crane Accessories Products

Scroll to Top